Recent Updates

Enari Instruments And Controls added 10 new photos in Thermometers
Nov 6, 2026 at 03:07 pm —
Enari Instruments And Controls added new photo
Mar 11, 2026 at 11:52 am —
Enari Instruments And Controls
Enari Instruments And Controls
Mar 6, 2026 at 08:14 pm —

How optimizing O₂ and CO₂ levels can save 5–15% in fuel costs.

To achieve 5–15% fuel savings, you must master the "Combustion Sweet Spot." Every boiler or furnace has an ideal ratio of air to fuel; a flue gas analyzer is the only tool that can find it. 1. The Problem: "Too Much Air" (Heat Loss) Most un-tuned burners run with excess air to ensure safety. However, heating up extra air that just goes out the chimney is a massive waste of money. The Physics: For every 1% reduction in excess oxygen (O₂), overall efficiency typically increases by 0.5%. The Savings: Reducing O₂ from 8% to 3% can immediately slash your fuel bill by 2.5% to 5%. 2. The Danger: "Too Little Air" (Incomplete Combustion) If you starve the fire of oxygen, you produce Carbon Monoxide (CO) and Soot. The Waste: Unburned fuel (CO) is literally energy you paid for that didn't turn into heat. The Damage: Soot acts as an insulator. Just 1/32 of an inch of soot on heat exchanger surfaces can reduce heat transfer efficiency by 10%. 3. The Solution: Finding the "CO₂ Peak" A flue gas analyzer allows a technician to adjust the burner until CO₂ is at its maximum and O₂ is at its minimum without producing dangerous levels of CO. Natural Gas: Target ~9–10% CO₂. Fuel Oil: Target ~12–13% CO₂. 4. Real-World Math If a commercial facility spends RM 100,000 annually on fuel: A 10% efficiency gain (via O₂/CO₂ tuning) saves RM 10,000 per year. The analyzer pays for itself in months, often within the first two or three tune-ups.
Enari Instruments And Controls added new photo
Feb 25, 2026 at 09:27 am —
Enari Instruments And Controls added new photo in TEST LEADS - FLUKE
Dec 23, 2025 at 11:35 am —
FLUKE TL75 Hard Point Test Lead Set

FLUKE TL75 Hard Point Test Lead Set

Key features Single unit combining a test lead and probe, measuring 48 inches (1.22 meters) in length PVC-insulated probes, ensuring secure and accurate measurements CAT II 1000 V, 10 A rated, When the protective caps are placed on the leads, the rating jump up to CAT IV 600 V, CAT III 1000 V *Enari Instruments And Controls a trusted and professional supplier in the industrial instruments and controls sector within Malaysia* read more
Enari Instruments And Controls added new photo in Infrared Thermometers - FLUKE
Dec 23, 2025 at 10:55 am —
FLUKE VT06 is a durable, compact visual IR thermometer

FLUKE VT06 is a durable, compact visual IR thermometer

FLUKE VT06 is a durable, compact visual IR thermometer that provides a thermal image overlay on a digital image to help identify hot and cold spots quickly and efficiently. It is designed for use in harsh industrial environments for non-contact temperature measurement. Key Features and Specifications Infrared Resolution: It has a 120 x 90 pixel infrared resolution, providing detailed temperature visualization. Temperature Range: It offers a wide temperature measurement range from -20°C to 400°C (-4°F to 752°F). Image Mode: The VT06 provides a thermal image display, which visualizes heat differences to pinpoint issues faster than a traditional spot thermometer. Durability: The device is IP65 rated for dust and water resistance and has been tested to withstand a 2-meter drop, making it suitable for demanding work conditions. Ease of Use: It features a simple, single-level menu interface and a built-in laser pointer for easy and accurate targeting. Battery Life: A full charge in 2 hours provides up to 8 hours of continuous battery life. Storage: Images are saved in JPEG format to the internal storage, which can hold over 100,000 images on some models.                       Common Applications The Fluke VT06 is a versatile diagnostic tool used across various fields, including: Electrical Troubleshooting: Inspecting electrical panels for overloads or loose connections by measuring heat output from components. HVAC Maintenance: Diagnosing heating, ventilation, and air conditioning system issues by identifying temperature variations in ductwork or machinery. Industrial Inspections: Performing preventive maintenance on industrial machinery to detect failing components before a breakdown occurs. Facility Management: Performing safety checks and general facility maintenance to identify potential hazards or energy loss spots.   *Enari Instruments And Controls a trusted and professional supplier in the industrial instruments and controls sector within Malaysia*   read more
Enari Instruments And Controls added new photo in Thermal Imaging Cameras - FLIR
Dec 22, 2025 at 04:01 pm —
FLIR E8 PRO handheld thermal camera

FLIR E8 PRO handheld thermal camera

The Flir E8 Pro is your must-have tool for locating and diagnosing electrical, mechanical, and building problems. Quickly pinpoint hot spots and easily identify problems with vibrant thermal imagery supported by Flir-patented MSX® (Multi-Spectral Dynamic Imaging) enhancement. Your inspections will be more efficient because you can do all your work from the touchscreen: organize your photos, add detailed notes, and upload them directly to the Flir Ignite cloud for convenient access from any device. When you’re ready to share images and create client reports, your images and notes are already available for your use in Flir Ignite or Flir Thermal Studio for the most streamlined experience. *Enari Instruments And Controls a trusted and professional supplier in the industrial instruments and controls sector within Malaysia*   read more
Enari Instruments And Controls added new photo in Thermal Imaging Cameras - FLIR
Dec 22, 2025 at 02:17 pm —
FLIR ONE EDGE PRO Thermal Camera

FLIR ONE EDGE PRO Thermal Camera

The FLIR ONE Edge Pro is an innovative, rugged thermal imager that wirelessly connects to your smart device so you can remotely inspect out-of-reach targets – or clip it onto your phone or tablet for one handed operation. Combining VividIR™ and FLIR MSX®, you can take crisp thermal images from any position or angle with a natural grip. FLIR Ignite™ allows you to easily upload images and videos from your FLIR ONE Edge Pro to the cloud where you can edit, organize, store, and share data. Compatible with iOS and Android smartphones and tablets, the FLIR ONE Edge Pro can be used without limitations, regardless of carrier, operating system, size, or future smart device upgrades. *Enari Instruments And Controls a trusted and professional supplier in the industrial instruments and controls sector within Malaysia* read more
next page

Switch to Mobile Version
Recent Updates
Subscribe Newsletter